Skip to main

Product Catalog

Contact Us at 970-232-9344

To discuss your product needs!

Product Catalog
CTC Authorized Distributor

Voyager Instruments is proud to be an authorized distributor of CTC Vibration Analysis Products.

CTC offers an extensive portfolio of the industry’s most durable and reliable hardware for permanent and portable vibration monitoring systems. CTC Products are proudly engineered and manufactured in the USA, and are designed to withstand long-term use in the most demanding industrial environments.

The CTC portfolio includes Industrial Accelerometers and Piezoelectric Sensors, Hazardous Rated Industrial Accelerometers, 4-20mA Loop Power Sensors, Specialty Accelerometers including Underwater Accelerometers, Wind Turbine Accelerometers and Wireless Transmitters, Industrial Cables, Connectors, Junction Boxes, Data Collectors, Mounting Hardware, and much more.

The CTC Line of products is backed by the industry’s best-in-class Unconditional Lifetime Warranty. Should any CTC Line product ever fail, for any reason, CTC will repair or replace the part free of charge. View the CTC Unconditional Lifetime Warranty Booklet for additional examples and information.

Below is a small sampling of the many CTC products we offer. Contact us for a quote and to discuss your product needs.

CTC Hazardous Rated Industrial Accelerometers

CTC offers a variety of single axis, biaxial, triaxial, dual output, and low capacitance sensors certified for Class I Division 2 (ATEX/IECEx Zone 2), as well as intrinsically safe protection methods under Class 1 Division 1 (ATEX/IECEx Zone 0/1).

Hazard Rating logos
INTRINSICALLY SAFE IECEx CERTIFIED ACCELEROMETERS - STANDARD SIZE:
AC963

AC963
Intrinsically Safe IEC Certified (IECEx / ANZEx / PESO) Accelerometer, Low Capacitance, 2 Pin, Top Exit, 50 mV/g, ±10% Sensitivity

AC964

AC964
Intrinsically Safe IEC Certified (IECEx / ANZEx / PESO) Accelerometer, Low Capacitance, 2 Pin, Side Exit, 50 mV/g, ±10% Sensitivity

CLASS I, DIVISION 2 (ATEX ZONE 2) ACCELEROMETERS - MINIATURE SIZE:
AC940

AC940
Class I, Division 2 / Zone 2 Small Accelerometer, 2 Pin Mini-MIL, Top Exit, 100 mV/g, ±10% Sensitivity

AC944

AC944
Class I, Division 2 / Zone 2 Small Accelerometer, 2 Pin Mini-MIL, Side Exit, 100 mV/g, ±10% Sensitivity

CTC Industrial Accelerometers

CTC offers a complete list of industrial accelerometers. Our ruggedized industrial accelerometers are available in single axis, biaxial, and triaxial designs. Many configurations allow for either top or side exit options. Side exit configurations are suitable for installations in areas where height is an issue. CTC's industrial accelerometers support a diverse set of applications with sensitivities values ranging from 10 mV/g to 1000 mV/g. Dual output configurations allow for vibration and temperature outputs.

100 MV/G STANDARD SIZE ACCELEROMETERS:
AC102 Multipurpose Accelerometer

AC102
Multipurpose Accelerometer, Top Exit 2 Pin Connector,
100 mV/g, ±10%

AC104 Multipurpose Accelerometer

AC104
Multipurpose Accelerometer, Side Exit 2 Pin Connector,
100 mV/g, ±10%

100 MV/G COMPACT SIZE ACCELEROMETERS:
AC192

AC192
Compact Multipurpose Accelerometer,
Top Exit 2 Pin Connector, 100 mV/g, ±10%

AC194

AC194
Compact Multipurpose Accelerometer,
Side Exit 2 Pin Connector, 100 mV/g, ±10%

100 MV/G MINI SIZE ACCELEROMETERS:
AC140 Mini Size Accelerometer

AC140
Low Cost Miniature Industrial Multipurpose Accelerometer,
Top Exit 2 Pin Mini-MIL Connector, 100 mV/g, ±15%

AC144 Mini Size Accelerometer

AC144
Low Cost Miniature Industrial Multipurpose Accelerometer,
Top Exit 2 Pin Mini-MIL Connector, 100 mV/g, ±15%

Ultrasound

CTC offers a high frequency ultrasound sensor with high amplitude resonance peak for stress wave measurement techniques and IEPE amplifier technology.

UEB330

UEB330
Dynamic Vibration IEPE Ultrasound Sensor, 1/4-28
Mounting, Top Exit 2 Pin Mini-MIL, 100 mV/g, ±10%

CTC Dual Output Sensors

CTC offers a wide variety of dual output vibration and temperature sensors. The newly upgraded TA200 Series features an upgraded temperature range, enabling measurements in frigid/below freezing environments.

IEPE TEMPERATURE & ACCELERATION SENSORS:
TA202

TA202
Dual Output Sensor, Temperature & Acceleration,
Top Exit 3 Pin Connector, 100 mV/g, 10 mV/°C, ±10%

TA204

TA204
Dual Output Sensor, Temperature & Acceleration,
Side Exit 3 Pin Connector, 100 mV/g, 10 mV/°C, ±10%

RTD TEMPERATURE & ACCELERATION SENSORS:
TR102

TR102-M12A
RTD Sensor, Top Exit 4 Pin M12 Connector, 100 mV/g,
±10%

TR104-M12A

TR104-M12A
RTD Sensor, Side Exit 4 Pin M12 Connector, 100 mV/g,
±10%

CTC Multi-Axis Accelerometers

CTC offers a variety of triaxial and biaxial accelerometers to fit the needs of your specific application. Many offerings are available in top or side exit options, as well as 10 mV/g and 100 mV/g sensitives. Speciality multi-axis accelerometers are also available, like CTC's inverse voltage triaxial and biaxial sensors as well as their compact TREA series.

TREA330

TREA330
Premium Miniature Industrial Triaxial Accelerometer, Side Exit 4 Pin Mini-MIL Connector, 100 mV/g, ±5%

AC115

AC115
Low Cost Triaxial Accelerometer, Side Exit 4 Pin Mini-MIL Connector, 100 mV/g, ±15%

AC119

AC119
Biaxial Accelerometer, Side Exit 3 Pin Connector, 100 mV/g, with X and Z Axis, ±15%

CTC 4-20mA Solutions

CTC offers a wide array of 4-20mA output solutions for industrial applications. CTC’s standard 4-20mA loop-powered vibration sensors are available with velocity as well as acceleration output measurement options. CTC’s loop-powered sensor line also includes a dual output option, with both 4-20mA output and dynamic output configurations in one sensor. Other options include 24 VDC powered transmitters that power standard IEPE accelerometers and convert the vibration to a powered 4-20mA signal. These transmitters also offer a 4-20mA output for temperature when coupled with CTC dual output vibration and temperature sensors.

LP202

LP202
Loop Power Sensor, 4-20mA Output Proportional to Vibration in Velocity, Top Exit 2 Pin Connector

SC320

SC320 Series
USB Configurable, Dual Band Vibration Plus Temperature Signal Conditioners

SC901 Series

SC901 Series
Hazardous Area Approved
4-20 mA Signal Conditioner

CTC Junction Boxes

CTC offers the widest variety of junction boxes in the world. Our junction box solutions allow for the monitoring of remotely mounted vibration sensors, which would be otherwise restricted to human access due to safety considerations. Also offered is a selection of low-cost cable termination boxes that allow multiple measurement points to be routed to a single location to gather data. Many CTC junction boxes offer continuous output options for direct interface to online monitoring systems.

SWITCH BOXES
JB110

JB110
iBOX Single Axis Vibration Switch Box, Fiberglass Enclosure, NEMA 4X (IP66) Rated, Channel Options: 4, 6, 8, 10 and 12

SB102

SB102
Single Axis Vibration Switch Box, Fiberglass Enclosure, NEMA 4X (IP66) Rated, Channel Options: 4, 6, 8, 10 and 12

SB152

SB152
Single Axis Vibration Switch Box with Continuous Output BNCs, Fiberglass Enclosure, NEMA 4X (IP66) Rated, Channel Options: 6 and 12

MODULAR SWITCH BOXES
SSB1000

SSB1000-SSB1001
Single Axis Modular Vibration Switch Box, Fiberglass Enclosure, NEMA 4X (IP66) Rated, Includes SSB-MOD(X) 1 to 12 Channel Switch Module

DSB1000

DSB1000-DSB1001
Dual Input & Output Modular Vibration Switch Box, Fiberglass Enclosure, NEMA 4X (IP66) Rated, Includes DSB-MOD(X) 1 to 8 Channel Dual Output Sensor Input Switch Module

TSB1000

TSB1000
Triaxial Input & Output Modular Vibration Switch Box, Fiberglass Enclosure, NEMA 4X (IP66) Rated, Includes TSB-MOD4 1 to 4 Triaxial Sensor Input Switch Module

ENCLOSED BNC CONNECTION BOXES:
MX102 1-12 Channels

MX102 1-12 Channels
Single Axis MAXX Box, Enclosed Individual BNC Connectors, Fiberglass Enclosure, NEMA 4X (IP66) Rated, Channel Options: 1 to 12

MMX1000 3-12 Channels

MMX1000 3-12 Channels
Single Axis Modular MAXX Box, Fiberglass Enclosure, NEMA 4X (IP66) Rated, Includes up to 4 MMX-MOD3 Modular BNC Connection Modules for 3, 6, 9, or 12 Channels

MX303 12 Channels

MX303 12 Channels
Triaxial Input & Output Maxx Box, Enclosed Individual 4 Pin Azima DLI Compatible Connectors, Fiberglass Enclosure, NEMA 4X (IP66) Rated, Channel Options: 4 Triaxial Outputs (12 Measurement Channels)

CABLE REDUCTION BOXES:
CR102 SERIES

CR102 SERIES
Cable Reduction Box, Fiberglass Enclosure,
NEMA 4X (IP66) Rated, -58 to 180 °F (-50 to 82 °C)

CABLE TERMINATION BOXES:
CT101 1-4 CHANNELS

CT101 1-4 CHANNELS
Polycarbonate, NEMA 4X
Rated Cable Termination Box

CTC Industrial Cables

CTC offers a wide variety of the world’s most durable and reliable industrial cables designed for reliable performance for all applications and environmental criteria.

STANDARD CABLING - PERMANENT MOUNT:
CB102

CB102
Twisted, Shielded Pair Cable, Red FEP Jacket,
0.175” (4.5 mm) OD, 392 °F (200 °C)

STANDARD CABLING - PORTABLE MOUNT:
CB105

CB105
4 Conductor, Shielded Cable, Black Polyurethane Jacket,
0.250” (6.4 mm) OD, 250 °F (121 °C)

MULTI CONDUCTOR CABLING:
CB109

CB109
12 Pair Multi-Conductor, Shielded Cable with Drain
Wire, Black PVC Jacket, 0.640” (16.2 mm) OD, 200 °F (93 °C)

CLASS I, DIVISION 2 APPROVED CABLING:
CB190

CB190
Class I, Division 2 Approved Cable, 2 Conductor Cable,
Blue Thermoplastic Elastomer (TPE) Jacket, 0.250” (6.4 mm)
OD, 221 °F (105 °C)

LOW SMOKE ZERO HALOGEN CABLING:
CB124

CB124
Low Smoke Zero Halogen Cable, Twisted, Shielded
Pair Cable, Brown Jacket, 0.250” (6.4 mm) OD, 221 °F (105 °C)

ARMOR PROTECTED CABLING:
CB202

CB202
Twisted, Shielded Pair Cable, Red FEP Jacket, Stainless Steel Armor, 0.270” (6.9 mm) OD, 392 °F (200 °C) Max Temp

BRAIDED ARMOR PROTECTED CABLING:
CB802

CB802
Twisted, Shielded Pair, Red FEP Jacket Conductor Cable, Stainless Steel Braided Outer Sheathing, 0.250” (6.4 mm) OD, 392 °F (200 °C)

HYDROLIC HOSE PROTECTED CABLING:
CB502

CB502
Twisted, Shielded Pair Cable, Red FEP Jacket, Hydraulic Hose Armor Protected, 0.5” (12.7 mm) OD, 212 °F (100 °C)

CTC Industrial Connectors

CTC offers a variety of standard and specialty connectors for every possible application. CTC sensor connectors support temperatures ranging from -58 ° F to 325 ° F (-58 °C to 163 °C). A wide selection of connectors supporting IP (Ingress Protection) ranging from IP66 to IP68 is available.

Cable jacket types include:
Fluorinated Ethylene Propylene (FEP), Polyurethane, Lightweight Polyurethane, PVC, Thermoplastic Elastomer (TPE), Low Smoke Zero Halogen

Cable armor options include:
Stainless Steel Braided Sheathing, Stainless Steel Armor, Hydraulic Hose Armor

Cable conductor options include:
2 Conductor, 3 Conductor, 4 Conductor, 6 Conductor, 8 Pair Multi Conductor, 12 Pair Multi Conductor, 16 Pair Multi Conductor, 12 Triad Multi Conductor

Class 1, Division 2 Hazardous Rated cables are also available.

CONNECTORS COMPATIBLE WITH STANDARD & COMPACT SIZE ACCELEROMETERS:
A2A

A2A
2 Socket MIL-Style, Polycarbonate Molded
Connector, Permanent Mount, 250 °F (121 °C) Max Temp

CONNECTORS COMPATIBLE WITH MINI SIZE ACCELEROMETERS:
J2A

J2A
2 Socket Mini-MIL Connector for CTC Miniature Industrial 2 Pin Accelerometers, Polycarbonate Molded,
Permanent Mount, 250 °F (121 °C) Max Temp

CONNECTORS COMPATIBLE WITH BIAXIAL & DUAL OUTPUT ACCELEROMETERS:
A3A

A3A
3 Socket MIL-Style
Connector, 250 °F (121 °C)

CONNECTORS COMPATIBLE WITH M12 SERIES ACCELEROMETERS:
M2A

M2M
5 Socket M12 Connector with 2 Live Sockets,
Polycarbonate Molded, Permanent Mount, 250 °F
(121 °C) Max Temp

BNCs & TNCs:
E Molded BNC Jack

E
Molded BNC Jack Connector, 250 °F (121 °C)
Max Temp

VITON® BOOT SERIES IP68 RATED CONNECTORS:
V2N

V2N
2 Socket MIL-Style Seal-Tight Viton® Boot
Connector with Nylon Insert, Permanent Mount, 250 °F
(121 °C) Max Temp

Looking for additional CTC Vibration Analysis Equipment?

Contact your Voyager Instruments Sales Rep or view the CTC Product Catalog

Contact us at (970) 232-9344 to discuss your product needs.